how to put nails in concrete

Hammering nails into concrete walls can feel like a challenging task, as concrete is a notoriously difficult material to penetrate. Yet, it’s a necessary skill if you’re trying to hang up pictures, shelves, or mirrors. This article contains a step-by-step guide on how to effectively nail into concrete walls, so that you’re prepared to tackle the challenge with confidence.

Firstly, Select the Ideal Nail

Nailing into concrete requires special nails with the right measurements. To ensure the nail is secured, select a model that is three times longer than the material’s thickness. Concrete nails are specifically created for this type of task, so using them will make sure the nail is firmly fixed in place.

Readying the Concrete Substrate for the Task Ahead

Before you decide to get hammering, take a moment to clean the concrete area where you plan to insert the nail. Utilize a brush to wipe away any dirt or debris that may be there. This will help to secure the nail in more efficiently without causing excessive cracks or damage. Don’t be tempted by your drill – take the traditional approach and tuck the nail away gently.

Identification of the Target

Pinpoint the desired nail location and mark it on the concrete with a pencil. Doing so will help keep the nail firmly in place and ensure it goes into the correct spot and direction.

Step 4 – Getting That Nail Started

Place the mark, then grab your hammer and nail. Secure the nail at the top and gently tap it with the hammer until it leaves an indent in the concrete. This indentation will give your nail more “bite,” making it easier to slot into the concrete.

Drive the Nail Home

Firmly gripping the nail, one hand holds it in place while the otherone drives it home. Hitting with force yet not too hard and in one confident motion, the hammer strikes until the nail is fully embedded in the concrete.

Final Touches – Finalizing the Piece

To make sure your nail is fastened firmly, give it a little wiggle with a pair of pliers. If you feel any looseness, replace the nail with a larger one and reapply. But if it’s secure, you are ready to suspend your item!

Although it may seem intimidating, successfully putting nails into concrete can be easily accomplished once you have the applicable materials and know the precise method. Carefully select the proper dimension of nail, prep and mark the location, sink a depression, and press the nail in with firmness. By executing these four steps, you can easily create a secure fastening of nails in concrete.

Related Product